Nissin Digital Di466 Speedlight Features & Technical Specs
TTL FLASH
Di466 responds to Canon's E-TTL, E-TTL II system, and Nikon's i-TTL system.
Those new digital TTL flash systems control the flash light with greater precision and stability.
Di466 responds to Canon's E-TTL, E-TTL II system, and Nikon's i-TTL system.
Those new digital TTL flash systems control the flash light with greater precision and stability.
NISSIN ORIGINAL “MY TTL” SETTING
The TTL flash power level is pre-set for reasonable exposure at factory. You can, however, reset the power at the desired exposure level, in +-3/4Ev. by 1/4Ev increments.
The preset value is memorized as your personal standard after switching the unit off.
This unique system for customizing your level settings, called MY TTL, is a feature exclusive to Nissin.
The usual TTL flash level compensation works based on this customized level.
The TTL flash power level is pre-set for reasonable exposure at factory. You can, however, reset the power at the desired exposure level, in +-3/4Ev. by 1/4Ev increments.
The preset value is memorized as your personal standard after switching the unit off.
This unique system for customizing your level settings, called MY TTL, is a feature exclusive to Nissin.
The usual TTL flash level compensation works based on this customized level.
TTL FLASH LEVEL COMPENSATION
The power of the flash can be controlled with TTL flash level compensation.
Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate for the exposure on the main subject only, with little impact on the exposure of the background scene.
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.
The power of the flash can be controlled with TTL flash level compensation.
Whereas total exposure is controlled by the camera's EV compensation function, the flash can compensate for the exposure on the main subject only, with little impact on the exposure of the background scene.
The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.
BATTERY MAGAZINE Quick Loading System
2 sec. loading by Nissin original battery magazine.
A convenient battery magazine has the slots for all four batteries in the same direction, with an anti-reverse loading guide so that the batteries can be correctly inserted every time, even in poor lighting. An extra battery magazine is separately available.
2 sec. loading by Nissin original battery magazine.
A convenient battery magazine has the slots for all four batteries in the same direction, with an anti-reverse loading guide so that the batteries can be correctly inserted every time, even in poor lighting. An extra battery magazine is separately available.
· Compatible cameras : [for Canon] CANON digital camera
[for Nikon] NIKON digital camera
[for Nikon] NIKON digital camera
· Guide Number : 33 /109 at 105mm focal length (ISO 100m/ft)
· Illumination angle: [for Canon, Nikon] 24~105mm (18mm with diffuse panel)
(Automatically set for the lens focal length)
(Automatically set for the lens focal length)
· Variable power : 6 levels : Full -1/2 -1/4 - 1/8 - 1/16 - 1/32 powers
· Flash exposure control :
[for Canon] E-TTL and E-TTL II
[for Nikon] i-TTL
[for Canon] E-TTL and E-TTL II
[for Nikon] i-TTL
· Power source : 4 X LR6(AA) or equivalent Mi-MH, lithium, oxyride batteries
· Recycling time :
0.2 - 4.5 sec., by fresh alkaline batteries
0.2 - 3.8 sec., by Ni-MH batteries
0.2 - 4.5 sec., by fresh alkaline batteries
0.2 - 3.8 sec., by Ni-MH batteries
· Energy saving system : 5 minutes to stand-by mode, 30 minutes to shut down
· Number of flashes : 200 - 1500 flashes by fresh alkaline batteries
· Illumination angle : Digital lens : 18mm (15mm with wide angle diffuser)
by zooming reflector : to - 18 - 24 - 35 - 47 - 57 - 70mm
Traditional lens: 28mm (20mm with wide angle diffuser)
to - 28 - 35 - 50 - 70 - 85 - 105mm
by zooming reflector : to - 18 - 24 - 35 - 47 - 57 - 70mm
Traditional lens: 28mm (20mm with wide angle diffuser)
to - 28 - 35 - 50 - 70 - 85 - 105mm
· Turning head : Flash head up to 0° ~ 90° with click-stops at 0°, 45°, 60°, 75°, 90°
· Slave mode :
Slave 1 for digital pre-flash system
Slave 2 for traditional single flash system
Power level - same as variable power above
Slave 1 for digital pre-flash system
Slave 2 for traditional single flash system
Power level - same as variable power above
· AF Assist light : Orange LED for distance of 0.7 to 6 meter.
· Color temperature : 5,600K (same as daylight)
· Flash duration : 1/800sec. to 1/20,000sec.
· Camera contact : Hotshoe only (not compatible with the traditional hotshoe system)
· Accessories included : Shoe stand, Pouch
· Dimensions : 67(W) x 105(H) x 95(D) mm / 2.6(W) x 4.1(H) x 3.7(D) inches
· Weight : 240g (without battery) / 8.4oz
Comments
Post a Comment